#
# GENERIC -- Generic kernel configuration file for FreeBSD/pc98
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/pc98/conf/GENERIC98,v 1.129 2000/03/01 08:52:28 kato Exp $

machine         pc98
#cpu            I386_CPU	（必要ないので消しましたが、残しておいて問題ありません）
#cpu            I486_CPU	（同上）
cpu             I586_CPU
cpu             I686_CPU
ident           GENERIC98
maxusers        32

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug symbols

options         PC98                    #PC98
#options        MATH_EMULATE            #Support for x87 emulation	（必要ないので消しましたが、残しておいて問題ありません）
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=20000        #Delay (in ms) before probing SCSI
options         EPSON_BOUNCEDMA         #use bounce buufer for 15-16M
#options        EPSON_MEMWIN            #EPSON memory window support
options         UCONSOLE                #Allow users to grab the console
options         LINE30
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extentions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies

# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options        NCPU=2                  # number of CPUs
#options        NBUS=4                  # number of busses
#options        NAPIC=1                 # number of IO APICs
#options        NINTR=24                # number of INTs

device          isa
device          pci

# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 11 drq 2
device          fd0     at fdc0 drive 0
device          fd1     at fdc0 drive 1
device          fd2     at fdc0 drive 2	（内蔵FDDが1台のみでも、外付FDDはfd2から認識します）
device          fd3     at fdc0 drive 3

# IDE controller and disks
device          wdc0    at isa? port IO_WD1 irq 9
device          wd0     at wdc0 drive 0
#device         wd1     at wdc0 drive 1
#device         wd2     at wdc0 drive 2
#device         wd3     at wdc0 drive 3
# ATAPI IDE CD-ROM machine
#device         wd0     at wdc0 drive 0
#device         wd1     at wdc0 drive 2
#device         wd2     at wdc0 drive 3
#
# UIDE-98 provides support for IO-DATA UIDE-98
#
#options        "UIDE98"	（UIDE-98を使うなら、こちらをc/o。）
#device         wdc0    at isa? port "0" bio irq ? flags 0xa0ffa0ff	（こちらは、内蔵IDEを切る場合。）
#device         wd0     at wdc0 drive 0
#device         wd1     at wdc0 drive 1
#device         wdc1    at isa? port "0" bio irq ? flags 0xa0ffa0ff
#device         wd2     at wdc1 drive 0
#device         wd3     at wdc1 drive 1
#
# If you are using a internal IDE contoller too, then use config lines.
#
#device         wdc2    at isa? port "IO_WD1" bio irq 9	（こちらは、内蔵IDEを併用する場合。）
#device         wd4     at wdc2 drive 0
#device         wd5     at wdc2 drive 1
#device         wd6     at wdc2 drive 2
#device         wd7     at wdc2 drive 3

# ATAPI devices on wdc
device          wcd             #IDE CD-ROM
#device         wfd             #IDE Floppy (e.g. LS-120)
#device         wst             #IDE Tape (e.g. Travan)

# SCSI Controllers
#device         adv
device          ahc             # AHA2940 and onboard AIC7xxx devices
device          amd             # AMD 53C974 (Teckram DC-390(T))
device          isp             # Qlogic family
device          ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets)

#
# WD33C93 SCSI card (55/92 like board)
#

options BS_TARG_SAFEMODE

# PC-9801-92
device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0
# SC-98
# device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000
# HA-55BS2 and later
#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000
# ELECOM type
#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000
# SMIT
#device bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x
40000
# Logitec LHA-20x
#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000

# PC-9801-100
device  aic0    at isa? port 0x1840 irq 5 flags 0x10000

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)

# RAID controllers
device          amr             # AMI MegaRAID
device          mlx             # Mylex DAC960 family

# keyboard driver
device          pckbd0  at isa? port IO_KBD irq 1
#options        KBD_INSTALL_CDEV

device          gdc0    at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa?

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 8

# Power management support (see LINT for more options)
#device         apm0    at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
device          card
device          pcic0   at isa? irq 6 port 0x3e0

# Serial (COM) ports
#
options         COM_MULTIPORT
#
# COM1
device          sio0    at isa? port IO_COM1 irq 4
# COM2 (2nd CCU)
device          sio1    at isa? port 0x238 irq 5 flags 0x12000000
# PC-9861K, PC-9801-101, MDC-926Rs
#device         sio1    at isa? port IO_COM2 irq 5 flags 0x01000000
#device         sio2    at isa? port IO_COM3 irq 6 flags 0x02000000
# PC-9801-120 (PnP off)
#device         sio1    at isa? port 0x8b0 irq 5 flags 0x11000000
# MC-16550II, MC-RS98
#device         sio1    at isa? port 0xd2 irq 5 flags 0x14000101
#device         sio2    at isa? port 0x8d2 flags 0x14000101
# RSB-2000, RSB-3000, B98-02
#device         sio1    at isa? port 0xb0 flags 0x15000101
#device         sio2    at isa? port 0xb1 flags 0x15000101
# RSB-384
#device         sio1    at isa? port 0xb0 flags 0x16000000
#device         sio2    at isa? port 0xb1 flags 0x16000000
# RSA-98III
#device         sio1    at isa? port 0x50e0 irq 5 flags 0x18000101
#device         sio2    at isa? port 0x51e0 flags 0x18000101
# ESP98
#options        COM_ESP
#device         sio1    at isa? port 0x18b0 irq 5 flags 0x19000000

device          mse0    at isa? port IO_MSE irq 13

# NEW Parallel port
device          ppc0    at isa? irq 14
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da
# OLD Parallel port
# Please stay olpt driver after ppc driver
device          olpt0   at isa? port IO_LPT


# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
device          tx              # SMC 9432TX (83c170 ``EPIC'')
device          vx              # 3Com 3c590, 3c595 (``Vortex'')
device          wx              # Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
device          miibus          # MII bus support
device          dc              # DEC/Intel 21143 and various workalikes
device          rl              # RealTek 8129/8139
device          sf              # Adaptec AIC-6915 (``Starfire'')
device          sis             # Silicon Integrated Systems SiS 900/SiS 7016
device          ste             # Sundance ST201 (D-Link DFE-550TX)
device          tl              # Texas Instruments ThunderLAN
device          vr              # VIA Rhine, Rhine II
device          wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
#
# DP8390 NIC
#
# ed0: generic driver/EtherEZ98
# ed1: LANEED LD-BDN
# ed2: EGY-98
# ed3: LGY-98
# ed4: ICM-IF-2766/EN-2298-T
# ed5: SIC-98
# ed6: PC-9801-108
# ed7: LA-98
# ed8: C-NET(98)
# ed9: C-NET(98)E/L
# ed10: EC/EP-98X
# ed11: SB-9801
# ed12: NC5098
#
device ed0 at isa? port 0x00d0 irq 6
#device ed0 at isa? port 0x10d0 irq 6 iomem 0xc8000     # EtherEZ98
device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000
#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 32768 flags 0x610000 #
 SIU-98-E
device ed1 at isa? port 0x00d8 irq 6 flags 0x200000
device ed3 at isa? port 0x00d0 irq 6 flags 0x400000
device ed4 at isa? port 0x56d0 irq 5 flags 0x500000
device ed2 at isa? port 0x00d8 irq 6 flags 0x300000
device ed7 at isa? port 0x00d0 irq 6 flags 0x900000
#device ed7 at isa? port 0x00d0 irq 6 flags 0x910000    # PC-9801-77
device ed6 at isa? port 0x0770 irq 6 flags 0x800000
device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000
#device ed9 at isa? port 0x03d0 irq 6 flags 0xb10000    # C-NET(98)E/L(0x55ED)
device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000
#device ed10 at isa? port 0x00d0 irq 3 flags 0xd00000   # EN1646
device ed10 at isa? port 0x00d0 irq 3 flags 0xd10000
device ed11 at isa? port 0x00d0 irq 3 flags 0xe00000
#device ed11 at isa? port 0x00d0 irq 3 flags 0xe00001   # SN-9801-2
device ed12 at isa? port 0x20d0 irq 3 flags 0xf00000
#
# MB86960A NIC
#
# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98
# fe1: C-NET(98)P2/C-NET(9N)E
#
# FE_8BIT_SUPPORT is needed to support LAC-98
#
options         FE_8BIT_SUPPORT         # LAC-98 support
device          fe0     at isa? port 0x00d0 irq 3
device          fe1     at isa? port 0x73d0 irq 5

#device         ep0     at isa? port 0x40d0 irq 3	（何故か動作が怪しくなるのでc/o）
device          lnc0    at isa? port 0x03d0 irq 6

# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
device          wi

# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
device          an

# requires PCCARD (PCMCIA) support to be activated
device          sn
#device         xe0     at isa?

device  snd	（サウンド機能を有効にする場合）
#device sb0     at isa? port 0x20d2 irq 10 drq 3	（サウンドブラスター互換）
#device sbxvi0  at isa? drq 3
#device sbmidi0 at isa? port 0x80d2
#device opl0    at isa? port 0x28d2
#device joy0    at isa? port 0x04d2
#device nss0    at isa? port 0xa460 irq 12	（PC-9801-86 / A-mate内蔵）
device  mss0    at isa? port 0xf40 irq 12 drq 1	（PC-98内蔵WSS (CS4231A)）
#device mpu0    at isa? port 0xe0d0 irq 6

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
#pseudo-device  vn      1       # Vnode driver
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif     4       # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter

#pseudo-device  compat_atdisk   #IBM-PC HDD support

# USB support
#device         uhci            # UHCI PCI->USB interface	（USBを使う場合）
device          ohci            # OHCI PCI->USB interface	（UHCIかOHCIかわからない場合は、両方c/oしても大丈夫です）
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard	（ここを有効にすると何故かコンパイルに失敗します(^^;。詳しくはこちら参照）
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
# USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet